
Add to Cart
19 Inch Lcd Display 1280x1024 Lvds Interface 30 Pins DV190E0M-N11 All Viewing Angle
General Description:
DV190E0M-N11 is a 19.0" LCD module product with a-Si TFT-LCD technology, it is assembled with WLED backlight, no backlight driver, no touch. typical features as: landscape mode / portrait mode, white LED backlight, positive terminal mount, and matte surface.
Features:
1.LVDS interface with 2 pixel / clock
2.High-speed response
3.Low color shift image quality
4.6-bit (Hi-FRC) color depth, display 16.7M colors
5.Wide viewing angle
6.DE (Data Enable) only mode
7.HADS technology is applied for high display quality
8.RoHS compliant
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 374.784(H) × 299.8272 (V) | mm | |
Number of pixels | 1280(H) × 1024(V) | pixels | |
Pixel pitch | 97.6(H) ×292.8(V) | um | |
Pixel arrangement | Pixels RGB Vertical stripe | ||
Display colors | 16.7M | colors | 6bits+FRC |
Display mode | Normally Black | ||
Dimensional outline | 396.0(H) × 324.0(V)×9.9(D) | mm | Detail refer to drawing |
Weight | 1520 | g | 19.82kg/box |
Power Consumption | 10.64 Typ. 14.216 Max. | Watt | BLU Consumption 8.64 Typ. 9.216 Max. |
Bezel width (L/R/U/D) | 8.6/8.6/ 10.5/ 10.5 | mm | |
Surface Treatment | Haze 25%, 3H | ||
Back-light | Down edge side, 1- LED Light bar | ||
Possible display type | Landscape and Portrait Enabled |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remark |
Power Supply Voltage | VDD | -0.3 | 6.0 | V | Ta = 25 ℃ |
Logic Supply Voltage | VIN | VSS-0.3 | VDD+0.3 | V | |
Operating Temperature | TOP | 0 | +50 | ℃ |
|
Storage Temperature | TSUR | -20 | +60 | ℃ | |
TST | -20 | +60 | ℃ | ||
Operating Ambient Humidity | Hop | 10 | 80 | %RH | |
Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
Parameter | Symbol | Values | Unit | Remark | |||
Min | Typ | Max | |||||
Power Supply Input Voltage | VDD | 4.5 | 5.0 | 5.5 | Vdc | ||
Power Supply Ripple Voltage | VRP | - | - | 200 | mV | ||
Power Supply Current | IDD | - | 400 | 1000 | mA | Note 1 | |
Power Consumption | PDD | - | 2 | 5 | Watt | ||
Rush current | IRUSH | - | 3.0 | A | Note 2 | ||
LVDS Interface |
Differential Input High Thr eshold Voltage | VLVTH | + 100 |
- |
+300 | mV | |
Differential Input Low Threshold Voltage |
VLVTL | -300 |
- |
- 100 | mV | ||
Input Differential Voltage | | VID | | 200 | - | 600 | mV | ||
Differential input common mode voltage |
VCM |
1.0 |
1.2 |
1.5 |
V |
Note 1:The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for VDD=5.0V,Frame rate fV=60Hz and Clock frequency=54MHz.
Note 2:The duration of rush current is about 2ms and rising time of Power Input is 1ms(min).
Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
LED Light Bar Input Voltage Per Input Pin | VPIN | 32.4 | 36 | 38.4 | V | Duty 100% | |
LED Light Bar Input Current Per Input Pin |
IPIN |
- |
120 |
- |
mA |
- |
|
Total Current | 240 | mA | |||||
Total Voltage | 32.4 | 36 | 38.4 | V | |||
LED Power Consumption | PBL | 8.64 | 9.22 | W | |||
LED Life-Time | N/A | 30000 |
- |
- |
Hour | IF = 120mA | |
PWM Control Level |
PWM High Level |
- |
- |
- |
V |
||
PWM Low Level |
- |
- |
- |
V |
|||
PWM Control Frequency |
FPWM |
- |
- |
- |
Hz |
||
Duty Ratio |
- |
- |
- |
- |
% |
Interface Connection:
LVDS Connector : IS100-L30O-C23(UJU)
Pin No | Symbol | Description | Pin No | Symbol | Description |
1 | RXO0- |
Negative Transmission data of Pixel 0 (ODD) |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) | 17 | GNG | Power Ground |
3 | RXO1- |
Negative Transmission data of Pixel 1 (ODD) |
18 | RXE2- |
Negative Transmission data of Pixel 2 (EVEN) |
4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) | 19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
5 | RXO2- |
Negative Transmission data of Pixel 2 (ODD) |
20 | RXEC- | Negative Transmission Clock (EVEN) |
6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) | 21 | RXEC+ |
Positive Transmission Clock (EVEN) |
7 | GND | Power Ground | 22 | RXE3- |
Negative Transmission data of Pixel 3 (EVEN) |
8 | RXOC- | Negative Transmission Clock (ODD) | 23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
9 | RXOC+ |
Positive Transmission Clock (ODD) |
24 | GND | Power Ground |
10 | RXO3- |
Negative Transmission data of Pixel 3 (ODD) |
25 | NC | No. Connection |
11 | RXO3+ | Positive Transmission data of Pixel 3 (ODD) | 26 | NC | No. Connection |
12 | RXE0- |
Negative Transmission data of Pixel 0 (EVEN) |
27 | NC | No. Connection |
13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) | 28 | VDD |
Power Supply: +5V |
14 | GND | Power Ground | 29 | VDD | |
15 | RXE1- |
Negative Transmission data of Pixel 1 (EVEN) |
30 | VDD |
Handling Precautions:
1.Do not connector or disconnect the cable to/from the Module at the “Power On” Condition.
2.When the module is operating, do not lose CLK, ENAB signals. If any one of these signals i s lost, the module would be damaged.
3.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.